Data rate: 10/100Mbps, 1000Mbps
Wavelength: 1310/1550nm,1550/1310nm, others
Fiber Types: Single mode (20km, 40km), multi mode (0.5km, 2km)
UTP Cable: UTP category 5, 5e cable
Color: Black or as customized
Connector Type: SC, BIDI or others
Interface Type: RJ45
Transmission Distance: 2km, 20km, 40km
Application: Ethernet Networks
Transmission Mode: Half duplex state (flow control) or full duplex (back pressure mode)
Storage Temperature: -4~167℉(-20 to 75℃)
Operating Temperature: 32~131℉(0 to 55℃)
Operating Humidity: 10%~90% no coagulation
Storage Humidity: 10%~95% no coagulation
Dimensions: 3.68 (L) x 12.01(W) x 18.54(H) cm
Power: Internal power, voltage and current DC48V and 1.25A
Power Consumption: ≤5W
Manageable or Unmanageable: Manageable or unmanageable are both available
Ethernet Interface, Power Input port 2 lightning protection
Natural Cooling, Compact Size, Less Heat
Anti-lightning, anti-surge function
10/100Base-TX UTP to 100Base-FX fiber media converter.
IEEE802.3af PoE PSE compatible.
9K bytes packet at cut-through mode
Built-in AC/DC power supply.
DIP switch to set different configurations.
LFP (Link Fault Pass-through) support
The benefit of the PSE media converters
PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, but they also safely power compatible devices plugged in on the copper side. These media converters are fully compliant with the 802.3af Power over Ethernet (PoE) standard.
Installing the Converter
- Connect the PSE media converter to an AC power source
- Install the TP media cable to the IEEE 802.3af PD converter
- Install the media cable for network connection