search
search

Chemical Mortar

- INDIA
Posted on: 29th May, 2015 | 09:48:AM
Reply to: info@indospark.com
Posted by: info
Price: (Not Provided)
Ad Type: I am selling
Price Format: Negotiable
I am: A Professional/Business
Contact Name: SANDEEP
Phone Number: 9823196066
Address: kolhapur
The CM410VESF is a high performance rapid curing styrene free low odor two component chemical injection anchoring system based on a high reactivity unsaturated vinylester resin in methacrylate monomers. The co-axial cartridge format comprises of a resin and hardening agent in separate internal compartments which are mixed to the correct proportions in the delivery nozzle when triggered using the required manual dispenser.Static loads :1. Structural connections transferring high loads into columns, beams,concrete pads and sections.2. Holding down bolts for steel columns.3. Masonry tie backs for steel structures.4. Bonding of irregular shapes and architectural features such as ballustrading.5. Due to low shrinkage the resin can also be used for rebar applications.Dynamic loads :1. Holding down machinery, fans and motors.2. Anchoring racking systems.3. Fixing of services, ducting and industrial pipe work bracketry.Chemical mortar CM410VESFMaterial vinylester styrene free Variant Variant 410ml co-axial 10:1 ratio cartridge Product code Content (ml) Colour when mixed Package contentCM410VESF 410 grey 12CMS410VESF 3 Cartridges CM410VESF, Dispenser Dm410, blow out pump Bp280, mixer nozzles Mn300 Clearing brushes and performed sleeves 1Installation - concrete and solid masonry• Drill hole to correct diameter and depth, diamond cored drill holes should beroughened prior to injection.• Clean drill hole thoroughly using wire brush and remove all dust using a blow out pump or airline.• Remove screw cap and attach mixer nozzle onto cartridge and insert in manual dispenser.• Discard the first 100mm of resin or until a uniform color has been achieved.• Inject from the base of the drill hole withdrawing as the hole fills until 1/3 to 1/2 full(dependent on application).• Insert clean fixing with a rotating motion until resin can be seen at the mouth of the hole, remove any excess immediately.• Leave undisturbed until cured and then attach fixture and torque to required setting.Installation Chemical Morter Set Installation - hollow masonry• Drill hole to correct diameter and depth, diamond cored drill holes should beroughened prior to injection• Clean drill hole thoroughly using wire brush and remove all dust using a blow out pump or airline.• Remove screw cap and attach mixer nozzle onto cartridge and insert in manual dispenser.• Discard the first 100mm of resin or until a uniform color has been achieved.• Insert nylon or metal sleeve as appropriate.• Inject from the base of the drill hole withdrawing as the hole fills until the sleeveis completely full.• Insert fixing carefully with a rotating motion.• Leave undisturbed until cured and then attach fixture.Base materials Recommended for use in reinforced non-reinforced concrete, rock and stone. It also provides a higher grade bond than standard epoxy acrylate resin in solid masonry, hollow brick-work and pre-cast units (requires suitable sleeve) with minimal shrinkage.Advantages• Non flamable.• Non hazardous environmentally friendly low oder.• Extreme heat and high chemical resistance.• High load values in concrete and masonry for medium to heavy duty applications.• Imparts non expansion stresses on the base material.• Suitable for close to edge and reduced anchor center fixing.• Usable in damp and wet environments and sugmerged drill holes.• Rapid cure.• Vibration resistant.• Corrosion resistant.
Static loads :1. Structural connections transferring high loads into columns, beams,concrete pads and sections.2. Holding down bolts for steel columns.3. Masonry tie backs for steel structures.4. Bonding of irregular shapes and architectural features such as ballustrading.5. Due to low shrinkage the resin can also be used for rebar applications.Dynamic loads :1. Holding down machinery, fans and motors.2. Anchoring racking systems.

Chemical Mortar

It is ok to contact this poster with commercial interests.

72 hits | Post# A454626

Report Abuse | Email this Ad

Chemical Mortar, India, Worldwide, For Sale, Business - Industrial